steinhoff_logo

 
HOME News Events About Us Contact Us

 

 

 

dachs_better_idea

 

 

Fieldbus Info
PROFIBUS
PROFINET
EPL  Powerlink
CAN / CANopen
INTERBUS
EtherCAT
ASi
LonTalk
Starterkits
Programming
DACHSview-SDL
OPC
Literature
other  PC/104 HW

 

 

qnx_partner_prog_rgb

   

DACHS CAN for Janus MM board

June 2008, STEINHOFF has released CAN support for the Dual-CAN PC/104 Board from Diamond Systems.  I comes with two different resource manager versions.

The resource manager "can" supports only one physical CAN channel. The resource manager "can_dual" supports both physical CAN channels.

The C-API is also available as function block library for DACHSview-SDL. The DACHS CANopen stack can run on top of the layer 2 resource managers. Up to 4 controller boards are supported in one PC.

 

DACHS EPL  ETHERNET Powerlink for QNX 6.3, now with 2 independant EPL Stacks

April 2008, STEINHOFF has released ETHERNET Powerlink for QNX 6.3 additional for the new generation of EPL PCI boards from SHF  shf-logo  with two independent EPL Stacks.

The high performance resource managers are available for the managing node (MN) and controlled node (CN).

The C-API is also available as function block library for DACHSview and DACHSview-SDL, our graphical programming environment for realtime and graphical applications.

 

DACHS Modbus for DACHSview-SDL / QNX 6.3

Nov. 2007, STEINHOFF has released the function block library for Modbus Serial for DACHSview-SDL / QNX 6.3.

 

 

DACHS EPL  ETHERNET Powerlink for QNX 6.3

Sept. 2007, STEINHOFF has released the very fast Ethernet based fieldbus ETHERNET Powerlink for QNX 6.3. 

The high performance resource manager is available for the managing node (MN) and controlled node (CN).

Our hardware partner for the EPL PCI board is SHF  shf-logo

The C-API is also available as function block library for DACHSview and DACHSview-SDL, our graphical programming environment for realtime and graphical applications.

 

DACHS CAN  now also for PCI and PC/104-Plus Boards from  peak-logo

Sept. 2007, STEINHOFF has released CAN support for the Dual-CAN PCAN-PCI und PCAN-PC/104-Plus Boards from PEAK-Systems.  The CPU load of the resource managers is less than 4% of a 400 MHz CPU with a frame rate of 100 frames/sec. 

The C-API is also available as function block library for DACHSview and DACHSview-SDL. The DACHS CANopen stack can run on top of the layer 2 resource managers. Up to 4 controller boards are supported in one PC.

 

DACHSview-SDL 

for standalone embedded graphical applications running under QNX6 and Photon/SDL.

     DACHSview-SDL is an innovative programming & GUI tool which is based on a graphical function block language and covers all aspects of today’s industrial automation. DACHSview-SDL applications are data flow- and function block oriented and are developed within an uniform programming environment supporting I/O ports, physical memory, fieldbus I/O points, TTF-fonts, SQL data bases, and the development of complex animated graphicsOne tool for all system interfaces !

    DACHSview-SDL includes calls of the libraries SDL and SDL-Gfx as pre-defined function blocks (FBs), and a TTF library. Further are included higher level FBs for bar graphs, meters, trend graphs, GUI buttons, control- and input-elements, etc. for easy handling of complex visualization tasks. Additional options are offerings of FB-libraries for SQLite (SQL data base), and fieldbus-support e.g.  The FB-libraries are integrated into the MS-Windows based programming-Workbench DACHSview. The developed real-time programs will be uploaded to specific remote QNX Neutrino RTOS v. 6.3 Targets. After uploading all applications are running w/o the workbench. 
    User-defined function blocks can be built. Existing C-applications can be integrated by message-passing. DACHSview-SDL is supporting visualization functions combined with Soft-PLC tasks.

  demo     Flyers:  DACHSview-SDL Flyer, English       DACHSview-SDL Flyer, deutsch   

 

DACHS PROFINET

an Ethernet based Fieldbus, offered for QNX 6.3 .The resource manager (driver) and API implementation for QNX 6.3 are fully compatible with the API defined by Siemens. The configuration of the CP16XX masters and its networks can be done by the SIMATIC NCM PC configuration tool from Siemens.  -  PROFINET is very fast and has a bus topology.

 

DACHS EtherCAT

for the Ethernet based Fieldbus EtherCAT is the first QNX 6.3 based implementation available with Resource Manager, C-API, and XML based Configuration Tools. - EtherCAT is very fast and has a ring topology.

 

DACHS CANopen

STEINHOFF has released a QNX 6.3 based CANopen stack for non-coprocessor boards with CAN controllers like i82527, SJA1000, the processor MPC 5200B, and others. It comes with selected frame level drivers, CANopen API and application frame work. It's offered with sources for a one time fee with royalty-free runtimes as OEM product, or in single licenses as part of a board/software package.

 

DACHSview

Visual Programming of RealTime-Applications with a MS-Windows based workbench. The Target is running QNX 6.3.

DACHSview allows event oriented processing by blocking function blocks based on IEC61499.

DACHSview is also available for PROFINET, EtherCAT, CANopen, PROFIBUS-DP, and INTERBUS.

 

 

    

© 1992 - 2008  STEINHOFF Automation & Fieldbus-Systems.   All rights reserved.

DACHS and the DACHS logo are registered trademarks from STEINHOFF A.

All other trademarks and registered trademarks belong to their respective owners.